220V W3001 XH-W3001 Digital Thermostat for incubator Temperature Controller 110V-220V 10A Thermoregulator temperature tester 12V

Power voltage supply:DC12V/24V/220VAC
Temperature measuring range: -50 ~ 110   
Temperature control range: -50 ~ 110   
Display accuracy:0.1°
Temperature measurement accuracy: plus or minus 0.2 degrees   
Temperature control accuracy: plus or minus 0.1 degrees   
Input measurement: NTC10K probe L = 1 meter waterproof   
Input power: according to the classification of choice   
Output power: according to the classification of choice   
Appearance size: 60 * 45 * 31 mm
Output type: relay output (output switch)
Output capacity: 10A
Press up to show start temperature button   
Long press The UP button the temperature display Flashing, press the UP or DOWN button Set the beginning of the temperature value   
Press Down the display button to stop temperature   
Long press the Down button the temperature display Flashing, press the UP or Down button Set to stop the temperature value   
Quantity: 1Pc   
Note: Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!!!   

Package includes:
1Pcx 12V/24V/220 V 10A Digital Thermostat Control Switch Temperature Controller LED + Probe 

Instructions:

1.Set the startup temperature:
Press ▲ key once to start the display temperature. Press and hold ▲ key for about 3 seconds to start the temperature digital flashing. Use ▲▼ key to set the desired temperature value.
2.Set the stop temperature:
Press the ▼ button to display the stop temperature. Press and hold the ▼ button for about 3 seconds to stop the temperature digital flashing. Use the ▲▼ keys to set the desired temperature value.
3.How to restore the factory settings:
When power is on, press and hold ▲▼ at the same time, the digital tube display 888 will then automatically jump to the detected temperature, that is, restore the factory settings.